Tag Archives: pto shaft clutch

China OEM Agricultural Pto Shaft Yoke Tractor Clutch Spline U Joint Cardan Couplings Cross Drive Universal Metal Power Take off Shaft

Product Description

 

Model Number 05(Push Pin)+RA2(Overrunning Clutch)
Function Power transmission
Use Tractors and various farm implements
Yoke Type push pin/quick release/ball attachment/collar/double push pin/bolt pins/split pins
Processing Of Yoke Forging
Tube Type Trianglar/star/lemon
Spline Type Spline Type

Materlal and Surface Treatment

Cross shaft

Heat treatment of 20Cr2Ni4A forging

Bearing cup

20CrMOTi forging heat treatment

Flange fork

ZG35CrMo, steel casting

Spline shaft

42GrMo forging heat treatment

Spline bushing

35CrM0 forging heat treatment

Sleeve body

42CrMo forging

Surface treatment:

spraying

Flat key, positioning ring

42GrMo forging

The above are standard models and materials.
If you have special supporting requirements, you can customize production according to customer needs.
Please click here to consult us!

Application scenarios

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard: GB, EN, OEM
Surface Treatment: All
Energy Source: All
Material: All
Load: Drive Shaft
Stiffness & Flexibility: Flexible Shaft

pto shaft

How do PTO drive shafts ensure efficient power transfer while maintaining safety?

PTO (Power Take-Off) drive shafts are designed to ensure efficient power transfer while prioritizing safety. These drive shafts incorporate various mechanisms and features to achieve both objectives. Here’s a detailed explanation of how PTO drive shafts ensure efficient power transfer while maintaining safety:

1. Robust Construction:

PTO drive shafts are typically constructed using high-quality materials such as steel or composite materials that offer strength and durability. The robust construction allows them to withstand the torque and power demands of the application, ensuring efficient power transfer without excessive flexing or deformation that could result in energy loss or premature failure.

2. Precise Alignment:

Efficient power transfer requires precise alignment between the PTO drive shaft, the primary power source (e.g., engine, transmission), and the implement or equipment being driven. Misalignment can lead to power loss, increased wear, and potential safety hazards. PTO drive shafts are designed with adjustable lengths or flexible couplings to accommodate variations in equipment size and ensure proper alignment, maximizing power transmission efficiency.

3. Connection Safety Features:

PTO drive shafts incorporate safety features to prevent accidents and minimize the risk of injury. One common safety feature is the use of shear pins or torque limiters. These components are designed to break or slip under excessive torque, protecting the drive shaft and connected equipment from damage. By sacrificing the shear pin, the PTO drive shaft disengages in case of overload, ensuring the safety of operators and preventing costly repairs.

4. Overload Protection:

Overload protection mechanisms are crucial for maintaining safety and preventing damage to the PTO drive shaft and associated equipment. Clutch systems or slip clutches can be employed to disengage the drive shaft when excessive torque or speed is encountered. These mechanisms allow the drive shaft to slip or disengage momentarily, preventing damage and reducing the risk of injury to operators or bystanders.

5. Shielding and Guarding:

PTO drive shafts are often equipped with shielding and guarding to prevent contact with moving parts. These protective covers ensure that operators and bystanders are shielded from rotating shafts, universal joints, and other potentially hazardous components. Proper shielding and guarding reduce the risk of entanglement, entrapment, or accidental contact, enhancing overall safety.

6. Compliance with Safety Standards:

PTO drive shafts are designed and manufactured to comply with relevant safety standards and regulations. These standards, such as ISO 500-1, specify requirements for power transmission components, including PTO drive shafts. Compliance with these standards ensures that the drive shafts meet necessary safety criteria and undergo rigorous testing to ensure their reliability and performance.

7. Regular Maintenance and Inspection:

Maintaining the safety and efficiency of PTO drive shafts requires regular maintenance and inspection. Operators should follow recommended maintenance schedules, including lubrication, inspection of components, and replacement of worn or damaged parts. Regular inspections help identify potential safety issues, such as worn bearings, damaged shielding, or compromised safety features, allowing for timely repairs or replacements.

8. Operator Training and Awareness:

Efficient power transfer and safety also depend on operator training and awareness. Operators should receive proper training on the safe operation and maintenance of PTO drive shafts. This includes understanding safety procedures, recognizing potential hazards, and being aware of the risks associated with improper use or maintenance. Promoting a culture of safety and providing ongoing training helps ensure that PTO drive shafts are used correctly and that potential risks are minimized.

By incorporating robust construction, precise alignment, connection safety features, overload protection, shielding and guarding, compliance with safety standards, regular maintenance and inspection, and operator training and awareness, PTO drive shafts can achieve efficient power transfer while maintaining a high level of safety. These measures help prevent accidents, protect equipment and operators, and ensure reliable and effective power transmission in various applications.

pto shaft

How do PTO drive shafts contribute to the efficiency of agricultural tasks like plowing?

PTO (Power Take-Off) drive shafts play a crucial role in enhancing the efficiency of agricultural tasks, including plowing. They provide a reliable and efficient power transmission mechanism between a tractor or power source and various implements, such as plows. Here’s how PTO drive shafts contribute to the efficiency of agricultural tasks like plowing:

1. Power Transfer:

PTO drive shafts enable the transfer of power from the tractor’s engine to the plow or other implements used for plowing. They transmit rotational power at a consistent speed from the power source to the implement, allowing it to perform the intended task efficiently. This direct power transfer eliminates the need for separate engines or motors on each implement, saving both time and resources.

2. Versatility:

PTO drive shafts are designed to be versatile and compatible with a wide range of agricultural implements. They come in standardized sizes and configurations, allowing different implements to be easily connected and disconnected. This versatility enables farmers to switch between various tasks, including plowing, without requiring significant equipment changes or modifications.

3. Time Efficiency:

By directly transmitting power from the tractor to the plow, PTO drive shafts help save time during agricultural tasks like plowing. They eliminate the need for manual or animal-driven labor, allowing for faster and more efficient plowing operations. This time efficiency increases overall productivity and enables farmers to cover larger areas in less time.

4. Consistent Power Output:

PTO drive shafts provide a consistent power output to the implement, ensuring uniform performance during plowing. They maintain a steady rotational speed, minimizing variations in power delivery and preventing uneven plowing or crop damage. This consistent power output helps achieve reliable and precise results, leading to improved efficiency in the plowing process.

5. Adjustable Speed and Depth:

Many PTO drive shafts offer adjustable rotational speeds, allowing farmers to control the plowing speed according to the specific soil conditions and requirements. This adjustability enables farmers to optimize the plowing process, ensuring efficient soil turnover and seedbed preparation. Additionally, some plows incorporate mechanisms for adjusting the plowing depth, further enhancing flexibility and efficiency.

6. Reduced Operator Fatigue:

The use of PTO drive shafts in plowing reduces the physical strain on operators. Instead of manually exerting force to plow the field, operators can rely on the power transmitted through the drive shaft. This reduces fatigue, allowing operators to work for longer durations without experiencing excessive exhaustion. Reduced operator fatigue contributes to increased productivity and overall efficiency in agricultural tasks.

7. Integration with Tractor Controls:

Modern PTO drive shafts often integrate with the tractor’s control system. This integration enables convenient and precise control of the PTO engagement and disengagement, rotational speed, and other parameters. Such integration enhances the ease of operation, minimizes errors, and improves overall efficiency during plowing and other agricultural tasks.

8. Maintenance and Serviceability:

PTO drive shafts are typically designed for ease of maintenance and serviceability. They often feature accessible lubrication points, inspection ports, and replaceable components, making it easier to keep them in good working condition. Regular maintenance ensures optimal performance, reduces the risk of unexpected breakdowns, and maximizes the efficiency of plowing operations.

In summary, PTO drive shafts significantly contribute to the efficiency of agricultural tasks like plowing. They enable direct and consistent power transfer, offer versatility in implement compatibility, save time, provide adjustable speed and depth control, reduce operator fatigue, integrate with tractor controls, and facilitate maintenance. By leveraging the capabilities of PTO drive shafts, farmers can enhance productivity, streamline operations, and achieve efficient plowing results.

pto shaft

What benefits do PTO drive shafts offer for various types of machinery?

PTO (Power Take-Off) drive shafts offer several benefits for various types of machinery in agricultural and industrial applications. They play a critical role in transferring power from a primary power source, such as a tractor or engine, to different types of machinery and equipment. Here’s a detailed explanation of the benefits provided by PTO drive shafts:

1. Versatility:

PTO drive shafts enhance the versatility of machinery by allowing them to be powered by a wide range of power sources. Tractors, engines, or other primary power sources can be used to provide rotational power, which can then be transferred through the PTO drive shaft to different types of machinery. This versatility enables the same power source to be utilized for various tasks and applications.

2. Increased Efficiency:

By utilizing a PTO drive shaft, machinery can tap into the power generated by a primary power source, such as a tractor’s engine, without the need for a separate engine or power supply. This eliminates the need for additional fuel consumption and maintenance associated with multiple power sources, leading to increased overall efficiency and reduced operating costs.

3. Cost-Effectiveness:

PTO drive shafts offer a cost-effective solution for powering machinery. Instead of investing in separate engines or power units for each piece of equipment, machinery can be directly connected to a primary power source with the use of a PTO drive shaft. This reduces the capital investment required for additional power sources and improves cost efficiency in the long run.

4. Ease of Installation and Operation:

PTO drive shafts are designed for easy installation and operation. They typically feature a standardized connection system, allowing for quick and simple attachment to the power source and machinery. This ease of installation and operation saves time and effort during equipment setup and ensures smooth integration between the power source and machinery.

5. Flexibility and Interchangeability:

PTO drive shafts offer flexibility and interchangeability between different implements and machinery. As long as the machinery has a compatible PTO input connection, it can be easily connected to the PTO drive shaft. This allows for quick swapping of implements and machinery, making it convenient to adapt to changing tasks and operational requirements.

6. Power Adjustability:

PTO drive shafts provide the ability to adjust the power output to machinery. Tractors or power sources typically have multiple PTO speed settings, allowing operators to match the rotational speed and power requirements of the machinery being driven. This adjustability ensures optimal performance and prevents damage to the machinery due to excessive or insufficient power.

7. Maintenance and Safety:

PTO drive shafts generally require less maintenance compared to separate engines or power units. They are designed for durability and reliability, with proper lubrication and periodic inspection being the main maintenance requirements. Additionally, PTO drive shafts can be equipped with safety features such as guards or shields to protect operators from potential hazards associated with rotating components.

8. Compatibility with Various Machinery:

PTO drive shafts are compatible with a wide range of machinery and equipment used in agricultural and industrial applications. They can power different types of implements, such as mowers, balers, tillers, harvesters, pumps, and generators, making them suitable for various tasks and industries.

Overall, PTO drive shafts offer numerous benefits for various types of machinery. They enhance versatility, increase efficiency, reduce costs, and provide ease of installation and operation. With their flexibility, adjustability, and compatibility, PTO drive shafts play a vital role in powering machinery and improving overall productivity in agricultural and industrial operations.

China OEM Agricultural Pto Shaft Yoke Tractor Clutch Spline U Joint Cardan Couplings Cross Drive Universal Metal Power Take off Shaft  China OEM Agricultural Pto Shaft Yoke Tractor Clutch Spline U Joint Cardan Couplings Cross Drive Universal Metal Power Take off Shaft
editor by CX 2024-01-09

China factory Rotavator Pto Shaft Propeller Attachment Nylon Bearing Wide Angle Cardan Tractor Sheets Tractor Drive Manual Driven Clutch Friction Telescopic Tube Shaft

Product Description

      rotavator pto shaft propeller attachment nylon bearing wide angle cardan tractor                    sheets tractor drive manual driven clutch friction telescopic tube shaft 
Application of PTO shaft
A power take-off (PTO) shaft is a mechanical component that transfers power from a power source, such as an engine or motor, to another machine or equipment. PTO shafts are commonly used in various applications where rotational force needs to be transmitted. Here are some typical applications of PTO shafts:

1. Agricultural Machinery: PTO shafts are extensively used in agricultural equipment such as tractors, combines, balers, and mowers. They connect the power source of the tractor (usually the engine) to various implements, allowing the transfer of rotational power for tasks like operating mowers, harvesting crops, baling hay, and powering irrigation pumps.

2. Forestry Equipment: PTO shafts are employed in forestry machinery, including wood chippers, log splitters, and sawmills. They enable power transmission from the engine to these equipment, facilitating wood processing, log cutting, and other forestry operations.

3. Construction Machinery: PTO shafts find applications in construction equipment such as concrete mixers, pumps, and generators. They allow power to be transmitted from the engine or motor to these machines, enabling tasks like mixing concrete, pumping water, and generating electricity on construction sites.

4. Industrial Machinery: PTO shafts are used in various industrial applications, including conveyor systems, grain elevators, industrial mixers, and rotary equipment. They transmit power from the primary source to auxiliary machinery, facilitating material handling, mixing, and processing operations in manufacturing, mining, and food processing industries.

5. Landscaping and Groundskeeping Equipment: PTO shafts are utilized in landscaping and groundskeeping machinery such as rotary mowers, brush cutters, and tillers. They enable power transfer from the engine to these implements, allowing for efficient grass-cutting, brush clearing, and soil preparation.

6. Marine Applications: PTO shafts are employed in marine propulsion systems, connecting the engine to the propeller shaft. They transmit power from the engine to the propeller, enabling propulsion and steering of boats and ships.

7. Energy Generation: PTO shafts are used in power generation applications, particularly in small-scale renewable energy systems. They connect the engine or turbine to a generator, converting rotational power into electrical power.

These are just a few examples of the diverse applications of PTO shafts. Their versatility, reliability, and ability to transmit rotational power make them indispensable in various industries where power transfer is essential for machinery and equipment operation.

Related products

 

We also provide Agricultural gearboxes.

Company Profile

 

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

pto shaft

Are there variations in PTO shaft designs for different types of machinery?

Yes, there are variations in PTO (Power Take-Off) shaft designs to accommodate the specific requirements of different types of machinery. PTO shafts are highly versatile and adaptable components used to transfer power from a power source, such as a tractor or engine, to driven machinery or equipment. The design variations in PTO shafts are necessary to ensure compatibility, efficiency, and safety in various applications. Here’s a detailed explanation of the different PTO shaft designs for different types of machinery:

1. Standard PTO Shafts: Standard PTO shafts are the most common design and are widely used in a variety of applications. They typically consist of a solid steel shaft with a universal joint at each end. These universal joints allow for angular misalignment between the power source and the driven machinery. Standard PTO shafts are suitable for applications where the distance between the power source and the driven machinery remains relatively fixed. They are commonly used in agricultural implements, such as mowers, balers, tillers, and seeders, as well as in industrial applications.

2. Telescopic PTO Shafts: Telescopic PTO shafts feature a telescoping design that allows for length adjustment. These shafts consist of two or more concentric shafts that can slide within each other. Telescopic PTO shafts are beneficial in applications where the distance between the power source and the driven machinery varies. By adjusting the length of the shaft, operators can ensure proper power transmission without the risk of the shaft dragging on the ground or being too short to reach the equipment. Telescopic PTO shafts are commonly used in front-mounted implements, snow blowers, self-loading wagons, and other applications where the distance between the power source and the implement changes.

3. CV (Constant Velocity) PTO Shafts: CV PTO shafts incorporate Constant Velocity joints to accommodate misalignment and angular variations. These joints maintain a constant speed and torque transfer even when the driven machinery is at an angle relative to the power source. CV PTO shafts are beneficial in applications where the driven machinery requires flexibility and a wide range of movement. They are commonly used in articulated loaders, telescopic handlers, self-propelled sprayers, and other equipment that requires continuous power transmission while operating at various angles.

4. Gearbox Driven PTO Shafts: Some machinery requires specific speed or torque ratios between the power source and the driven equipment. In such cases, PTO shafts may incorporate gearbox systems. Gearbox driven PTO shafts allow for speed reduction or increase and can change the rotational direction if necessary. The gear ratios in the gearbox can be adjusted to match the speed and torque requirements of the driven machinery. These PTO shafts are commonly used in applications where the power source operates at a different speed or torque level than the equipment it drives, such as in certain industrial manufacturing processes and specialized machinery.

5. High-Torque PTO Shafts: Some heavy-duty machinery requires high torque levels for power transmission. High-torque PTO shafts are designed to handle these demanding applications. They are constructed with reinforced components, including larger diameter shafts and heavier-duty universal joints, to withstand the increased torque requirements. High-torque PTO shafts are commonly used in equipment such as wood chippers, crushers, and heavy-duty agricultural implements that require substantial power and torque for their operation.

6. Safety PTO Shafts: Safety is a crucial consideration when using PTO shafts. Safety PTO shafts incorporate mechanisms to reduce the risk of accidents and injuries. One common safety feature is the use of protective guards that cover the rotating shaft to prevent accidental contact. These guards are typically made of metal or plastic and are designed to shield the rotating components while allowing the necessary movement for power transmission. Safety PTO shafts are used in various applications where the risk of entanglement or accidental contact with the rotating shaft is high, such as in grass mowers, rotary cutters, and other equipment used in landscaping and agriculture.

These are some of the key variations in PTO shaft designs for different types of machinery. The specific design used depends on factors such as the application requirements, power source characteristics, torque levels, movement flexibility, and safety considerations. PTO shaft manufacturers offer a range of designs to ensure compatibility and efficient power transmission in diverse industries and applications.

pto shaft

Are there any limitations or disadvantages associated with PTO shafts?

While PTO (Power Take-Off) shafts offer numerous advantages in terms of power transfer and versatility, they also have certain limitations and disadvantages. It’s important to consider these factors when using PTO shafts to ensure safe and efficient operation. Here’s a detailed explanation of some limitations and disadvantages associated with PTO shafts:

1. Safety Hazards: One of the primary concerns with PTO shafts is the potential for safety hazards. PTO shafts rotate at high speeds and can pose a significant risk if not properly guarded or handled. Accidental contact with an exposed or inadequately shielded PTO shaft can result in severe injuries, including entanglement, amputation, or even fatalities. It is crucial to follow safety guidelines, implement proper guarding, and ensure that operators are well-trained on safe handling practices to mitigate these risks.

2. Maintenance and Lubrication: PTO shafts require regular maintenance and lubrication to ensure optimal performance and longevity. The moving parts, such as universal joints and splines, need to be inspected, cleaned, and lubricated at recommended intervals. Neglecting maintenance can lead to premature wear, decreased efficiency, and potential failures. Proper maintenance practices, including regular inspections and timely lubrication, are essential to mitigate these issues.

3. Alignment and Angles: PTO shafts rely on proper alignment and angles to ensure efficient power transfer. Misalignment or excessive angles between the power source and driven machinery can cause increased wear and strain on the components, leading to premature failure. Ensuring proper alignment and angle adjustment, using adjustable sliding yokes or other means, is important to prevent excessive stress on the PTO shaft and associated equipment.

4. Length Limitations: PTO shafts have limitations on their maximum and minimum length due to engineering constraints. The telescoping design allows for some adjustment, but there is a practical limit to how much the shaft can extend or retract. If the distance between the power source and driven machinery exceeds the maximum or falls below the minimum length of the PTO shaft, alternative solutions or modifications may be required. In some cases, additional components such as drive shaft extensions or gearboxes may be necessary to bridge the distance.

5. Compatibility: While manufacturers strive to ensure compatibility, there can still be challenges in finding the right PTO shaft for specific equipment configurations. Equipment may have unique requirements in terms of spline sizes, torque ratings, or connection methods that may not be readily available or compatible with off-the-shelf PTO shafts. Customization may be required to address these compatibility issues, which can result in increased costs or lead times.

6. Noise and Vibrations: PTO shafts in operation can generate significant noise and vibrations, especially at higher speeds. This can be a nuisance for operators and may require additional measures to reduce noise levels or dampen vibrations. Excessive vibrations can also affect the overall performance and lifespan of the PTO shaft and connected equipment. Implementing vibration dampeners or using flexible couplings can help mitigate these issues.

7. Power Limits: PTO shafts have specific power limits based on their design, materials, and components. Exceeding these power limits can lead to premature wear, component failures, or even shaft breakage. It is crucial to understand and adhere to the recommended power ratings for PTO shafts to ensure safe and reliable operation. In some cases, upgrading to a higher-capacity PTO shaft or implementing additional power transmission components may be necessary to accommodate higher power requirements.

8. Complex Installation and Removal: Installing and removing PTO shafts can be a complex process, especially in confined spaces or when dealing with heavy equipment. It may require aligning splines, engaging couplings, and securing locking mechanisms. Improper installation or removal techniques can lead to damage to the shaft or associated equipment. Proper training, handling equipment, and following manufacturer guidelines are essential to simplify and ensure the safe installation and removal of PTO shafts.

Despite these limitations and disadvantages, PTO shafts remain widely used and valuable components for power transfer in various industries. By addressing these considerations and implementing proper safety measures, maintenance practices, and alignment procedures, the potential drawbacks of PTO shafts can be effectively mitigated, allowing for safe and efficient operation.

pto shaft

How do PTO shafts handle variations in speed and torque requirements?

PTO shafts (Power Take-Off shafts) are designed to handle variations in speed and torque requirements between the power source (such as a tractor or engine) and the driven machinery or equipment. They incorporate various mechanisms and components to ensure efficient power transmission while accommodating the different speed and torque demands. Here’s a detailed explanation of how PTO shafts handle variations in speed and torque requirements:

1. Gearbox Systems: PTO shafts often incorporate gearbox systems to match the speed and torque requirements between the power source and the driven machinery. Gearboxes allow for speed reduction or increase and can also change the rotational direction if necessary. By using different gear ratios, PTO shafts can adapt the rotational speed and torque output to suit the specific requirements of the driven equipment. Gearbox systems enable PTO shafts to provide the necessary power and speed compatibility between the power source and the machinery they drive.

2. Shear Bolt Mechanisms: Some PTO shafts, particularly in applications where sudden overloads or shock loads are expected, use shear bolt mechanisms. These mechanisms are designed to protect the driveline components from damage by disconnecting the PTO shaft in case of excessive torque or sudden resistance. Shear bolts are designed to break at a specific torque threshold, ensuring that the PTO shaft separates before the driveline components suffer damage. By incorporating shear bolt mechanisms, PTO shafts can handle variations in torque requirements and provide a safety feature to protect the equipment.

3. Friction Clutches: PTO shafts may incorporate friction clutch systems to enable smooth engagement and disengagement of power transfer. Friction clutches use a disc and pressure plate mechanism to control the transmission of power. Operators can gradually engage or disengage the power transfer by adjusting the pressure on the friction disc. This feature allows for precise control over torque transmission, accommodating variations in torque requirements while minimizing shock loads on the driveline components. Friction clutches are commonly used in applications where smooth power engagement is essential, such as in hydraulic pumps, generators, and industrial mixers.

4. Constant Velocity (CV) Joints: In cases where the driven machinery requires a significant range of movement or articulation, PTO shafts may incorporate Constant Velocity (CV) joints. CV joints allow the PTO shaft to accommodate misalignment and angular variations without affecting power transmission. These joints provide a smooth and constant power transfer even when the driven machinery is at an angle relative to the power source. CV joints are commonly used in applications such as articulated loaders, telescopic handlers, and self-propelled sprayers, where the machinery requires flexibility and a wide range of movement.

5. Telescopic Designs: Some PTO shafts feature telescopic designs that allow for length adjustment. These shafts consist of two or more concentric shafts that slide within each other, providing the ability to extend or retract the PTO shaft as needed. Telescopic designs accommodate variations in the distance between the power source and the driven machinery. By adjusting the length of the PTO shaft, operators can ensure proper power transmission without the risk of the shaft dragging on the ground or being too short to reach the equipment. Telescopic PTO shafts are commonly used in applications where the distance between the power source and the implement varies, such as in front-mounted implements, snow blowers, and self-loading wagons.

By incorporating these mechanisms and designs, PTO shafts can handle variations in speed and torque requirements effectively. They provide the necessary flexibility, safety, and control to ensure efficient power transmission between the power source and the driven machinery. PTO shafts play a critical role in adapting power to meet the specific needs of various equipment and applications.

China factory Rotavator Pto Shaft Propeller Attachment Nylon Bearing Wide Angle Cardan Tractor Sheets Tractor Drive Manual Driven Clutch Friction Telescopic Tube Shaft  China factory Rotavator Pto Shaft Propeller Attachment Nylon Bearing Wide Angle Cardan Tractor Sheets Tractor Drive Manual Driven Clutch Friction Telescopic Tube Shaft
editor by CX 2023-10-08

China Hot selling Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft

Product Description

   wide angle pto shafts cardan tractor tractor drive nylon sheets manual driven clutch                       friction telescopic tube gearbox for tiller agricultural pto shaft 

Application of wide angle pto shafts

A wide angle PTO shaft is a type of drive shaft that is used to transmit power from a power source, such as a tractor, to an implement, such as a baler or mower. Wide angle PTO shafts are designed to accommodate a wide range of misalignment between the power source and the implement. This makes them ideal for use in applications where the power source and the implement are not located in the same plane, such as in agricultural equipment.

Wide angle PTO shafts are available in a variety of lengths and configurations. The length of the shaft is determined by the distance between the power source and the implement. The configuration of the shaft is determined by the type of power source and the type of implement.

Wide angle PTO shafts are a valuable component in many agricultural applications. They allow farmers to use a variety of implements with a single tractor. This can save farmers time and money.

Here are some of the benefits of using a wide angle PTO shaft:

  • Accommodates a wide range of misalignment: Wide angle PTO shafts are designed to accommodate a wide range of misalignment between the power source and the implement. This makes them ideal for use in applications where the power source and the implement are not located in the same plane, such as in agricultural equipment.
  • Increased efficiency: Wide angle PTO shafts can help increase agricultural equipment’s efficiency. This is because they allow the power source to transfer power to the implement more effectively.
  • Reduced wear and tear: Wide angle PTO shafts can help to reduce wear and tear on the power source and the implement. This is because they allow the power source and the implement to operate more smoothly.
  • Increased safety: Wide angle PTO shafts can help to increase the safety of agricultural equipment. This is because they help to prevent the power source and the implement from coming into contact with each other, which can lead to injuries.

Wide angle PTO shafts are a valuable component in many agricultural applications. They allow farmers to use a variety of implements with a single tractor. This can save farmers time and money. Wide angle PTO shafts can also help to increase the efficiency, reduce wear and tear, and increase the safety of agricultural equipment.

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

pto shaft

Can PTO shafts be adapted for use in both agricultural and industrial settings?

Yes, PTO (Power Take-Off) shafts can be adapted for use in both agricultural and industrial settings. While PTO shafts are commonly associated with agricultural machinery, they are versatile components that can be utilized in various applications beyond the agricultural sector. With appropriate modifications and considerations, PTO shafts can effectively transfer power in industrial settings as well. Here’s a detailed explanation of how PTO shafts can be adapted for both agricultural and industrial use:

1. Standard PTO Shaft Design: PTO shafts have a standardized design that allows for compatibility and interchangeability across different equipment and machinery. This standardization enables PTO shafts to be used in various applications, including both agricultural and industrial settings. The basic components of a PTO shaft, such as the universal joints, splined shafts, and protective guards, remain consistent, regardless of the specific application. This consistency allows for easy adaptation and integration into different machinery and equipment.

2. Shaft Length and Sizing: PTO shafts can be customized in terms of length and sizing to suit specific requirements in both agricultural and industrial settings. The length of the shaft can be adjusted to accommodate different distances between the power source and the driven machinery. This flexibility allows for optimal power transmission and ensures compatibility with various equipment setups. Similarly, the sizing of the PTO shaft, including the diameter and splined shaft specifications, can be tailored to meet the torque and power requirements of different applications, whether in agriculture or industry.

3. Power Requirements: PTO shafts are designed to transfer power from a power source to driven machinery. In agricultural settings, the power source is typically a tractor or other agricultural vehicles, while in industrial settings, it can be an engine, motor, or power unit specific to the industry. PTO shafts can be adapted to handle different power requirements by considering factors such as torque capacity, rotational speed, and the specific demands of the machinery or equipment being driven. By selecting the appropriate PTO shaft based on the power requirements, the shaft can effectively transfer power in both agricultural and industrial applications.

4. Safety Considerations: Safety is a critical aspect of PTO shaft design and usage, regardless of the application. PTO shafts incorporate safety features such as protective guards and shields to prevent accidental contact with rotating components. These safety measures are essential in agricultural and industrial settings to minimize the risk of entanglement, injury, or damage. Adapting PTO shafts for industrial use may require additional safety considerations based on the specific hazards present in industrial environments. However, the core safety principles and features of PTO shafts can be applied and adapted to ensure safe operation in both settings.

5. Specialized Attachments: PTO shafts can be equipped with specialized attachments or adapters to accommodate different driven machinery or equipment. In agricultural settings, PTO shafts commonly connect to implements such as mowers, balers, or sprayers. In industrial settings, PTO shafts may be adapted to connect to various industrial machinery, including pumps, generators, compressors, or conveyors. These specialized attachments ensure compatibility and efficient power transfer between the PTO shaft and the driven equipment, allowing for seamless integration in both agricultural and industrial applications.

6. Environmental Considerations: PTO shafts can be adapted to address specific environmental conditions in both agricultural and industrial settings. For example, in agricultural applications, PTO shafts may need to withstand exposure to dirt, dust, moisture, and varying weather conditions. Industrial settings may have their unique environmental challenges, such as exposure to chemicals, high temperatures, or abrasive materials. By selecting PTO shaft materials, protective coatings, and seals suitable for the specific environment, the shafts can be adapted to ensure reliable and durable performance in various settings.

7. Compliance with Standards: PTO shafts, whether used in agricultural or industrial settings, need to comply with relevant safety standards and regulations. Manufacturers adhere to guidelines and requirements set by organizations such as the American Society of Agricultural and Biological Engineers (ASABE) or other regional safety authorities. Compliance ensures that PTO shafts meet safety criteria and performance standards applicable to both agricultural and industrial environments. Users can rely on standardized PTO shafts that have undergone testing and certification, offering assurance regarding their reliability and safety.

By considering the factors mentioned above, PTO shafts can be adapted to effectively transfer power in both agricultural and industrial settings. The versatile nature of PTO shafts, coupled with customization options, safety considerations, specialized attachments, and compliance with standards, allows for their successful integration into a wide range of machinery and equipment across various industries.

pto shaft

Are there any limitations or disadvantages associated with PTO shafts?

While PTO (Power Take-Off) shafts offer numerous advantages in terms of power transfer and versatility, they also have certain limitations and disadvantages. It’s important to consider these factors when using PTO shafts to ensure safe and efficient operation. Here’s a detailed explanation of some limitations and disadvantages associated with PTO shafts:

1. Safety Hazards: One of the primary concerns with PTO shafts is the potential for safety hazards. PTO shafts rotate at high speeds and can pose a significant risk if not properly guarded or handled. Accidental contact with an exposed or inadequately shielded PTO shaft can result in severe injuries, including entanglement, amputation, or even fatalities. It is crucial to follow safety guidelines, implement proper guarding, and ensure that operators are well-trained on safe handling practices to mitigate these risks.

2. Maintenance and Lubrication: PTO shafts require regular maintenance and lubrication to ensure optimal performance and longevity. The moving parts, such as universal joints and splines, need to be inspected, cleaned, and lubricated at recommended intervals. Neglecting maintenance can lead to premature wear, decreased efficiency, and potential failures. Proper maintenance practices, including regular inspections and timely lubrication, are essential to mitigate these issues.

3. Alignment and Angles: PTO shafts rely on proper alignment and angles to ensure efficient power transfer. Misalignment or excessive angles between the power source and driven machinery can cause increased wear and strain on the components, leading to premature failure. Ensuring proper alignment and angle adjustment, using adjustable sliding yokes or other means, is important to prevent excessive stress on the PTO shaft and associated equipment.

4. Length Limitations: PTO shafts have limitations on their maximum and minimum length due to engineering constraints. The telescoping design allows for some adjustment, but there is a practical limit to how much the shaft can extend or retract. If the distance between the power source and driven machinery exceeds the maximum or falls below the minimum length of the PTO shaft, alternative solutions or modifications may be required. In some cases, additional components such as drive shaft extensions or gearboxes may be necessary to bridge the distance.

5. Compatibility: While manufacturers strive to ensure compatibility, there can still be challenges in finding the right PTO shaft for specific equipment configurations. Equipment may have unique requirements in terms of spline sizes, torque ratings, or connection methods that may not be readily available or compatible with off-the-shelf PTO shafts. Customization may be required to address these compatibility issues, which can result in increased costs or lead times.

6. Noise and Vibrations: PTO shafts in operation can generate significant noise and vibrations, especially at higher speeds. This can be a nuisance for operators and may require additional measures to reduce noise levels or dampen vibrations. Excessive vibrations can also affect the overall performance and lifespan of the PTO shaft and connected equipment. Implementing vibration dampeners or using flexible couplings can help mitigate these issues.

7. Power Limits: PTO shafts have specific power limits based on their design, materials, and components. Exceeding these power limits can lead to premature wear, component failures, or even shaft breakage. It is crucial to understand and adhere to the recommended power ratings for PTO shafts to ensure safe and reliable operation. In some cases, upgrading to a higher-capacity PTO shaft or implementing additional power transmission components may be necessary to accommodate higher power requirements.

8. Complex Installation and Removal: Installing and removing PTO shafts can be a complex process, especially in confined spaces or when dealing with heavy equipment. It may require aligning splines, engaging couplings, and securing locking mechanisms. Improper installation or removal techniques can lead to damage to the shaft or associated equipment. Proper training, handling equipment, and following manufacturer guidelines are essential to simplify and ensure the safe installation and removal of PTO shafts.

Despite these limitations and disadvantages, PTO shafts remain widely used and valuable components for power transfer in various industries. By addressing these considerations and implementing proper safety measures, maintenance practices, and alignment procedures, the potential drawbacks of PTO shafts can be effectively mitigated, allowing for safe and efficient operation.

pto shaft

How do PTO shafts contribute to transferring power from tractors to implements?

PTO shafts (Power Take-Off shafts) play a critical role in transferring power from tractors to implements in agricultural and industrial settings. They provide a reliable and efficient means of power transmission, enabling tractors to drive various implements and perform a wide range of tasks. Here’s a detailed explanation of how PTO shafts contribute to transferring power from tractors to implements:

Power Source: Tractors are equipped with powerful engines designed to generate substantial amounts of mechanical power. This power is harnessed to drive the tractor’s wheels and operate hydraulic systems, as well as to provide power for the attachment of implements through the PTO shaft. The PTO shaft typically connects to the rear or side of the tractor, where the power take-off mechanism is located. The power take-off derives power directly from the tractor’s engine or transmission, allowing for efficient power transfer to the PTO shaft.

PTO Shaft Design: PTO shafts are designed as driveline components that transmit rotational power and torque from the tractor’s power take-off to the implement. They consist of a hollow metal tube with universal joints at each end. The universal joints accommodate angular misalignments and allow the PTO shaft to transmit power even when the tractor and implement are not perfectly aligned. The PTO shaft is also equipped with a safety shield or guard to prevent accidental contact with the rotating shaft, ensuring operator safety during operation.

PTO Engagement: To transfer power from the tractor to the implement, the PTO shaft needs to be engaged. Tractors are equipped with a PTO clutch mechanism that allows operators to engage or disengage the PTO shaft as needed. When the PTO clutch is engaged, power flows from the tractor’s engine through the power take-off mechanism and into the PTO shaft. This rotational power is then transmitted through the PTO shaft to the implement, driving its working components.

Rotational Power Transmission: The rotational power generated by the tractor’s engine is transferred to the PTO shaft through the power take-off mechanism. The PTO shaft, being directly connected to the power take-off, rotates at the same speed as the engine. This rotational power is then transmitted from the PTO shaft to the implement’s driveline or gearbox. The implement’s driveline, in turn, distributes the power to the implement’s working components, such as blades, augers, or pumps, enabling them to carry out their respective functions.

Matching Speed and Power: PTO shafts are designed to match the rotational speed and power requirements of various implements. Tractors often feature multiple speed settings for the PTO, allowing operators to select the appropriate speed for the specific implement being used. Different implements may require different rotational speeds to operate optimally, and the PTO shaft allows for easy adjustment to match those requirements. Additionally, the power generated by the tractor’s engine is transmitted through the PTO shaft, providing the necessary torque to drive the implement’s working components effectively.

Versatility and Efficiency: PTO shafts offer significant versatility and efficiency in agricultural and industrial operations. They allow tractors to power a wide range of implements, including mowers, balers, tillers, sprayers, and grain augers, among others. By connecting implements directly to the tractor’s power source, operators can quickly switch between tasks without the need for separate power generators or engines. This versatility and efficiency streamline workflow, reduce costs, and increase overall productivity in agricultural and industrial settings.

Safety Considerations: While PTO shafts are essential for power transmission, they can pose safety risks if mishandled. The rotating shaft and universal joints can cause severe injuries if operators come into contact with them while in operation. That’s why PTO shafts are equipped with safety shields or guards to prevent accidental contact. Operators should always ensure that the safety shields are in place and secure before engaging the PTO shaft. Proper training, adherence to safety guidelines, and regular maintenance of PTO shafts and associated safety features are crucial to ensuring safe operation.

In summary, PTO shafts are vital components that enable the transfer of power from tractors to implements in agricultural and industrial applications. They provide a reliable and efficient means of power transmission, allowing tractors to drive various implements and perform a wide range of tasks. By engaging the PTO clutch and transmitting rotational power through the PTO shaft, tractors power the working components of implements, providing versatility, efficiency, and productivity in agricultural and industrial operations.

China Hot selling Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft  China Hot selling Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft
editor by CX 2023-10-06

China Good quality Rotavator Pto Shaft Propeller Attachment Nylon Bearing Wide Angle Cardan Tractor Sheets Tractor Drive Manual Driven Clutch Friction Telescopic Tube Shaft

Product Description

      rotavator pto shaft propeller attachment nylon bearing wide angle cardan tractor                    sheets tractor drive manual driven clutch friction telescopic tube shaft 
Application of PTO shaft
A power take-off (PTO) shaft is a mechanical component that transfers power from a power source, such as an engine or motor, to another machine or equipment. PTO shafts are commonly used in various applications where rotational force needs to be transmitted. Here are some typical applications of PTO shafts:

1. Agricultural Machinery: PTO shafts are extensively used in agricultural equipment such as tractors, combines, balers, and mowers. They connect the power source of the tractor (usually the engine) to various implements, allowing the transfer of rotational power for tasks like operating mowers, harvesting crops, baling hay, and powering irrigation pumps.

2. Forestry Equipment: PTO shafts are employed in forestry machinery, including wood chippers, log splitters, and sawmills. They enable power transmission from the engine to these equipment, facilitating wood processing, log cutting, and other forestry operations.

3. Construction Machinery: PTO shafts find applications in construction equipment such as concrete mixers, pumps, and generators. They allow power to be transmitted from the engine or motor to these machines, enabling tasks like mixing concrete, pumping water, and generating electricity on construction sites.

4. Industrial Machinery: PTO shafts are used in various industrial applications, including conveyor systems, grain elevators, industrial mixers, and rotary equipment. They transmit power from the primary source to auxiliary machinery, facilitating material handling, mixing, and processing operations in manufacturing, mining, and food processing industries.

5. Landscaping and Groundskeeping Equipment: PTO shafts are utilized in landscaping and groundskeeping machinery such as rotary mowers, brush cutters, and tillers. They enable power transfer from the engine to these implements, allowing for efficient grass-cutting, brush clearing, and soil preparation.

6. Marine Applications: PTO shafts are employed in marine propulsion systems, connecting the engine to the propeller shaft. They transmit power from the engine to the propeller, enabling propulsion and steering of boats and ships.

7. Energy Generation: PTO shafts are used in power generation applications, particularly in small-scale renewable energy systems. They connect the engine or turbine to a generator, converting rotational power into electrical power.

These are just a few examples of the diverse applications of PTO shafts. Their versatility, reliability, and ability to transmit rotational power make them indispensable in various industries where power transfer is essential for machinery and equipment operation.

Related products

 

We also provide Agricultural gearboxes.

Company Profile

 

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

pto shaft

What maintenance practices are essential for prolonging the lifespan of PTO shafts?

Maintaining proper care and performing regular maintenance on Power Take-Off (PTO) shafts is crucial for prolonging their lifespan and ensuring optimal performance. By following essential maintenance practices, you can prevent premature wear, identify potential issues early on, and maximize the longevity of your PTO shafts. Here are some key maintenance practices to consider:

1. Regular Inspection: Perform routine visual inspections of the PTO shaft to check for any signs of damage, wear, or misalignment. Look for cracks, dents, bent sections, or loose components. Inspect the universal joints, coupling mechanisms, protective guards, and other associated parts. Pay attention to any unusual noises, vibrations, or changes in performance, as these can indicate underlying issues that require attention.

2. Lubrication: Proper lubrication is essential for the smooth operation and longevity of PTO shafts. Follow the manufacturer’s recommendations regarding lubrication intervals and use the recommended lubricant type. Apply lubrication to the universal joints, CV joints (if applicable), and other moving parts as specified. Regularly check for adequate lubricant levels and replenish if necessary. Ensure that the lubricant used is compatible with the shaft material and does not attract dirt or debris that could cause abrasion or damage.

3. Cleaning: Keep the PTO shaft clean and free from dirt, debris, and other contaminants. Regularly remove any accumulated dirt, grease, or residue using a brush or compressed air. Be particularly diligent in cleaning the universal joints and areas where the shaft connects to other components. Cleaning prevents the buildup of abrasive particles that can accelerate wear and compromise the shaft’s performance.

4. Guard Inspection and Maintenance: Check the protective guards and shields regularly to ensure they are securely in place and free from damage. Guards play a critical role in preventing accidental contact with the rotating shaft and minimizing the risk of injury. Repair or replace any damaged or missing guards promptly. Ensure that the guards are correctly aligned and provide sufficient coverage for all moving parts of the PTO shaft.

5. Torque and Fastener Checks: Periodically inspect and check the torque of fasteners, such as bolts and nuts, that secure the PTO shaft and associated components. Over time, vibration and normal operation can loosen these fasteners, compromising the integrity of the shaft. Use the appropriate torque specifications provided by the manufacturer to ensure proper tightening. Regularly verify the tightness of fasteners and retighten as necessary.

6. Shear Bolt or Slip Clutch Maintenance: If your PTO shaft incorporates shear bolt or slip clutch mechanisms, ensure they are functioning correctly. Inspect the shear bolts for signs of wear or damage, and replace them when necessary. Check the slip clutch for proper adjustment and smooth operation. Follow the manufacturer’s recommendations regarding maintenance and adjustment of these safety mechanisms to ensure their effectiveness in protecting the driveline components.

7. Proper Storage: When the PTO shaft is not in use, store it in a clean and dry environment. Protect the shaft from exposure to moisture, extreme temperatures, and corrosive substances. If possible, store the shaft in a vertical position to prevent bending or distortion. Consider using protective covers or cases to shield the shaft from dust, dirt, and other potential sources of damage.

8. Operator Training: Provide proper training to operators on the correct operation, maintenance, and safety procedures related to the PTO shafts. Educate them about the importance of regular inspections, lubrication, and adherence to recommended maintenance practices. Encourage operators to report any abnormalities or concerns promptly to prevent further damage and ensure timely repairs or adjustments.

9. Manufacturer and Expert Guidance: Consult the manufacturer’s guidelines and recommendations regarding maintenance practices specific to your PTO shaft model. Additionally, seek advice from experts or authorized service technicians who are knowledgeable about PTO shaft maintenance. They can provide valuable insights and assistance in implementing the best maintenance practices for your specific PTO shafts.

By following these maintenance practices, you can extend the lifespan of your PTO shafts, optimize their performance, and reduce the likelihood of unexpected failures or costly repairs. Regular inspections, lubrication, cleaning, guard maintenance, torque checks, and proper storage are all essential in ensuring the longevity and reliability of your PTO shafts.

pto shaft

Can PTO shafts be customized for specific machinery and power requirements?

Yes, PTO (Power Take-Off) shafts can be customized to meet the specific machinery and power requirements of different applications. Manufacturers offer customization options to ensure that PTO shafts are precisely tailored to the power source, driven machinery, and the intended application. Here’s a detailed explanation of how PTO shafts can be customized:

1. Shaft Length: PTO shafts can be customized in terms of length to accommodate different equipment configurations. The length of the PTO shaft is critical to ensure proper alignment and connection between the power source and driven machinery. Manufacturers can provide PTO shafts with adjustable or fixed-length options, allowing for flexibility in meeting specific length requirements. Customizing the shaft length ensures that the PTO shaft fits the equipment properly, optimizing power transfer efficiency and reducing the risk of misalignment or excessive stress.

2. Spline Sizes: PTO shafts are available with different spline sizes to match the input and output shafts of various equipment. Spline size customization allows the PTO shaft to seamlessly connect to the power source and driven machinery. Manufacturers can offer different spline configurations, such as 1-3/8 inch, 1-3/4 inch, or metric sizes, to accommodate specific machinery requirements. Customizing the spline size ensures a proper fit and secure connection, enabling efficient power transfer without the need for additional adapters or modifications.

3. Yoke Designs: PTO shafts can be customized with different yoke designs to match the connection points on the power source and driven machinery. The yoke is the component that attaches to the shaft and connects to the equipment. Manufacturers can provide various yoke designs, such as round, triangular, or splined yokes, to ensure compatibility with specific machinery. Customizing the yoke design allows for a secure and reliable connection, aligning the PTO shaft with the equipment’s input/output shafts and optimizing power transmission efficiency.

4. Torque Ratings: PTO shafts can be customized to handle specific torque requirements based on the power demands of the application. Torque is the rotational force that the PTO shaft needs to transmit from the power source to the driven machinery. Manufacturers can design PTO shafts with different torque ratings by using appropriate materials, dimensions, and reinforcement techniques. Customizing the torque rating ensures that the PTO shaft can safely and reliably handle the required power levels without premature wear or failure.

5. Coupling Mechanisms: PTO shafts can be customized with different coupling mechanisms to match the connection requirements of specific equipment. Coupling mechanisms are the means by which the PTO shaft connects and disconnects from the power source and driven machinery. Manufacturers can provide various coupling options, such as quick-release couplings, shear pin couplings, or mechanical lock couplings, to accommodate different machinery designs and operational needs. Customizing the coupling mechanism ensures ease of use, secure attachment, and quick disengagement when necessary.

6. Protective Features: PTO shafts can be customized with additional protective features to enhance safety and durability. These features may include guard shields, safety covers, or slip clutches. Guard shields and safety covers provide physical protection by enclosing the rotating shaft and preventing accidental contact, reducing the risk of injuries. Slip clutches offer overload protection by allowing the PTO shaft to slip or disengage when excessive torque or resistance is encountered, preventing damage to the shaft and associated equipment. Customizing the protective features ensures compliance with safety regulations and addresses specific safety requirements of the machinery or application.

7. Material Selection: PTO shafts can be customized with different materials based on the application’s demands. Manufacturers can offer a range of material options, such as steel, aluminum, or composite materials, with varying strength, weight, and corrosion resistance properties. Customizing the material selection allows for optimizing the PTO shaft’s performance, considering factors like operating conditions, environmental exposure, and weight restrictions.

By providing customization options such as shaft length, spline sizes, yoke designs, torque ratings, coupling mechanisms, protective features, and material selection, manufacturers can ensure that PTO shafts are specifically tailored to meet the machinery and power requirements of different applications. Customized PTO shafts facilitate seamless integration, efficient power transfer, and reliable operation, enhancing the overall performance and productivity of the equipment.

pto shaft

Which industries commonly use PTO shafts for power transmission?

PTO shafts (Power Take-Off shafts) are widely used in various industries where power transmission is required to drive machinery and equipment. Their versatility, efficiency, and compatibility with different types of machinery make them valuable components in several sectors. Here’s a detailed explanation of the industries that commonly use PTO shafts for power transmission:

1. Agriculture: The agricultural industry extensively relies on PTO shafts for power transmission. Tractors equipped with PTOs are commonly used to drive a wide range of agricultural implements and machinery. PTO-driven equipment includes mowers, balers, tillers, seeders, sprayers, grain augers, harvesters, and many more. PTO shafts allow for the efficient transfer of power from the tractor’s engine to these implements, enabling various agricultural operations such as cutting, baling, tilling, planting, spraying, and harvesting. The agricultural sector heavily depends on PTO shafts to enhance productivity and streamline farming processes.

2. Construction and Earthmoving: In the construction and earthmoving industry, PTO shafts find applications in machinery used for excavation, grading, and material handling. PTO-driven equipment such as backhoes, loaders, excavators, trenchers, and stump grinders utilize PTO shafts to transfer power from the prime movers, typically hydraulic systems, to drive the necessary attachments. These attachments require the high torque and power provided by PTO shafts to perform tasks like digging, loading, trenching, and grinding. PTO shafts allow for versatile and efficient power transmission in construction and earthmoving operations.

3. Forestry: The forestry industry utilizes PTO shafts for power transmission in various logging and timber processing equipment. PTO-driven machinery such as wood chippers, sawmills, log splitters, and debarkers rely on PTO shafts to transfer power from tractors or dedicated power units to perform tasks like chipping, sawing, splitting, and debarking wood. PTO shafts provide the necessary power and torque to drive the cutting and processing mechanisms, enabling efficient and productive forestry operations.

4. Landscaping and Groundskeeping: PTO shafts play a crucial role in the landscaping and groundskeeping industry. Equipment like lawn mowers, rotary cutters, flail mowers, and aerators utilize PTO shafts to transfer power from tractors or dedicated power units to drive the cutting or grooming mechanisms. PTO shafts enable efficient power transmission, allowing operators to maintain lawns, parks, golf courses, and other outdoor spaces with precision and productivity.

5. Mining and Quarrying: PTO shafts have applications in the mining and quarrying industry, particularly in equipment used for material extraction, crushing, and screening. PTO-driven machinery such as crushers, screeners, and conveyors rely on PTO shafts to transfer power from engines or motors to drive the crushing and screening mechanisms, as well as the material handling systems. PTO shafts provide the necessary power and torque to process and transport bulk materials effectively in mining and quarrying operations.

6. Industrial Manufacturing: PTO shafts are utilized in various industrial manufacturing processes that require power transmission to drive specific machinery and equipment. Industries such as food processing, textile manufacturing, paper production, and chemical processing may use PTO-driven machinery for tasks like mixing, blending, cutting, extruding, and conveying. PTO shafts enable efficient power transfer to these machines, ensuring smooth and reliable operation in industrial manufacturing settings.

7. Utilities and Infrastructure Maintenance: PTO shafts find applications in utilities and infrastructure maintenance operations. Equipment like street sweepers, sewer cleaners, road maintenance machines, and drain augers utilize PTO shafts to transfer power from trucks or dedicated power units to perform tasks like sweeping, cleaning, and maintenance of roads, sewers, and other public infrastructure. PTO shafts enable efficient power transmission, ensuring effective and reliable operation of these utility and maintenance machines.

8. Others: PTO shafts are also used in several other industries and sectors where power transmission is required. This includes applications in the transportation industry for powering refrigeration units, fuel pumps, and hydraulic systems in trucks and trailers. PTO shafts also find applications in the marine industry for powering winches, pumps, and other equipment on boats and ships.

In summary, PTO shafts are commonly used in a wide range of industries for power transmission. These industries include agriculture, construction and earthmoving, forestry, landscaping and groundskeeping, mining and quarrying, industrial manufacturing, utilities and infrastructure maintenance, transportation, and marine sectors. PTO shafts play a critical rolein enhancing productivity, enabling efficient operation of machinery, and facilitating various tasks in these industries.
China Good quality Rotavator Pto Shaft Propeller Attachment Nylon Bearing Wide Angle Cardan Tractor Sheets Tractor Drive Manual Driven Clutch Friction Telescopic Tube Shaft  China Good quality Rotavator Pto Shaft Propeller Attachment Nylon Bearing Wide Angle Cardan Tractor Sheets Tractor Drive Manual Driven Clutch Friction Telescopic Tube Shaft
editor by CX 2023-09-30

China Hot selling agricultural machinery & equipment agriculture pto shaft plastic guard and overrunning clutch tractor pto shaft

Condition: New
Warranty: 1 Year
Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other
Weight (KG): 20 KG
Showroom Location: None
Video outgoing-inspection: Provided
Machinery Test Report: Provided
Marketing Type: Ordinary Product
Type: Shafts
Use: Harvesters
Product Name: agriculture pto shaft plastic guard and overrunning clutch
Usage: Tractors and Farm Implements
Teeth: All teeth
Processing of Yoke: Forge
Certificate: CE, ISO and TS
Processing of Tube: Cold-Drawn
Cross Kit: Full Range of Cross kit
Tubes: Customized Tubes
Yoke: Push pin yoke
Color: All Color
Packaging Details: Plastic bag+ Woodencase + According to Customer’s request
Port: ZheJiang or HangZhou

Model Number9K Driveshaft supply all kinds pto shaft and support OME
FunctionDrive Shaft Parts & Power Transmission
UseKinds of Tractors & Farm Implements
Brand Name9K
Yoke TypeDouble push pin,Bolt pins, Customized Mini Precision Stainless Steel Clamping Shaft Collar Split pins,Push pin,Quick release,Ball attachment,Collar…..
Processing Of YokeForging
Plastic CoverYW;BW;YS;BS;Etc
ColorGreen;Orange;Yellow;Black Ect.
SeriesT1-T10; L1-L6;S6-S10;10HP-150HP with SA,RA,SB,SFF,WA,CV Etc
Tube TypeLemon, HanBuild 60SS20 0.64N.m 1.5A 3000-6000rpm mini servo motor kit driver ASD220 220V Robot CNC Machine Tool 200w servo motor 60 Trianglar,Star,Square,Hexangular,Spline,Special Ect
Processing Of TubeCold drawn
Spline Type1 1/8″ Z6;1 3/8″ Z6; 1 3/8″ Z21 ;1 3/4″ Z20; 1 3/4″ Z6; 8-38*32*6 8-42*36*7; 8-48*42*8;
Place of OriginHangZhou, China (Mainland)
ZHangZhoug Jiukai Drive Shaft Co., Ltd. located in CZPT Industrial Park HangZhou City, Hot sell HG-KR23 CZPT AC Servo Motor 2 hours to the Xihu (West Lake) Dis. Airport and 1 hour to the Xihu (West Lake) Dis. Airport & the East of HangZhou Station,Covered more than 12,000 m² with over 100 people on staff. We’re specialized in developing,manufacturing and marketing PTO Shaft, Industrial Cardan Shaft, Car Driveshaft, U-Joint Coupling Shaft and Universal Joint etc. The annual turnover is 60 million RMB, 9 Million Dollars,and It’s increasing year by year. Our products gained great reputation from Europe, American, Asia, Australia, and North American customers. And we are the top3 professional OEM supplier for many factory of Agricultural Implements in domestic market. Jiukai Driveshaft insisted our “QDP” principles : Quality first, Deliver quickly , Bringsmart DC Planetary gear Motor BSPG22-370 Mini Electric Gearbox Moto12V 24V 125RPM small gearbox motor Price Competitive. We already got the CE, TS/16949, ISO9001 Certificates and with systematic manufacturing equipments and QC team to guarantee our quality and delivery. We warmly welcome every friend to visit us and establish the mutual beneficial long-term relationship cooperation.

with Hot selling
China Hot selling agricultural machinery & equipment agriculture pto shaft plastic guard and overrunning clutch     tractor pto shaftChina Hot selling agricultural machinery & equipment agriculture pto shaft plastic guard and overrunning clutch     tractor pto shaft
editor by Cx 2023-07-12

China Agricultural Cross Joint and PTO Yoke Assembly for Cardan Shaft Parts with Different Length pto shaft clutch

Condition: New
Warranty: 1 Year
Relevant Industries: Developing Material Stores, Producing Plant, Equipment Repair Retailers, Farms, Retail, Building performs
Fat (KG): 2 KG
Showroom Place: None
Online video outgoing-inspection: Presented
Machinery Take a look at Report: Supplied
Marketing Kind: Regular Product
Sort: Shafts components
Use: Tractors
Item name: Agricultural Cross Joint and PTO Yoke Assembly for Cardan Shaft Components
Colour: Black, Silver,Yellow,OEM
Purpose: Power transmission
Search term: Common Steering Joint Shaft Column Assembly
MOQ: 1
Technics: Forge, Chilly-Drawn
Packing detail: pp bag + paper box
Material: 40Cr,45#
Emission Regular: Euro II
Placement: Rear
Packaging Details: Shaft Parts -> Plastic Bag -> White/Coloration box -> Carton -> Pallet
Port: HangZhou or ZheJiang

Merchandise Overview Agricultural Cross Joint and PTO Yoke Assembly for Cardan Shaft Elements with Diverse Duration Solution Specifications

NameAgricultural Cross Joint and PTO Yoke Assembly for Cardan Shaft Components with Diverse Length
AdvantageWe are 1 specialist maker of all varieties driveline, Pto shaft and parts.Our manufacturing facility Cover an area of 13320.
ApplicationKinds of Tractors & Farm Implements
PartsJapanese tractor transmission clutch disc components for B1400 B7000
Processing Of YokeForging
Plastic CoverYWBWYSBSEtc
ColorGreenOrangeYellowBlack Ect.
SeriesT1-T10 L1-L6S6-S1010HP-150HP with SA,RA, Source 6v9v12v18v24v24v48v60v220v motor Carbon Brush for vehicle blower ,substantial quality and cost-free sample SB,SFF,WA,CV, Etc
Tube SortLemon,Trianglar,Star,Square,Hexangular,Spline,Special, Ect
Spline Sort1 1/8″ Z61 3/8″ Z6 1 3/8″ Z21 1 3/4″ Z20 1 3/4″ Z6 8-38*32*6 8-42*36*7 8-48*42*8
Tractor Design we can provideB1500/1400, Honest Manufacture TTI supplier 110V 220V 320w 500w 750w Three Stage OEM Minimal Rpm Higher Torque Electrical AC Enthusiast Motors B5000,B6000, B7000, TU1400, TX1400, TX1500, YM F1401, YM1400 And so on.
Attributes AT A Look Other related parts for cars or machinery we have made in our workshop are as follows:Drive shaft areas and assemblies,Common joint areas and assemblies,PTO drive shafts,Spline shafts,Slip yokes,Weld yokes,Flange yokes,Steering columns,Connecting rods,and so on. Merchandise packaging Exhibition Why Select Us FAQ Q: Do you supply samples ? A: Of course, we could offer you the sample.Q: How lengthy is your delivery time ? What is your phrases of payment ?A: Normally it is 30-forty five days. The time may possibly range depending on the solution and the amount of customization.Q: What is the precise MOQ or price for your item ?A: As an OEM firm, we can provide and adapt our goods to a wide range of requirements.As a result, MOQ and value may tremendously differ with size, material and even more requirements For instance, costly items or normal items will normally have a reduce MOQ.Please contact us with all appropriate particulars to get the most precise quotation.If you have another issue, you should really feel free to speak to us.

drive shaft yoke
China Agricultural Cross Joint and PTO Yoke Assembly for Cardan Shaft Parts with Different Length     pto shaft clutchChina Agricultural Cross Joint and PTO Yoke Assembly for Cardan Shaft Parts with Different Length     pto shaft clutch
editor by Cx 2023-06-27

China Top Grade Tractor Clutch For Sale Pto Drive Shaft With Clutch (Ce Certificate) with high quality

Error:获取返回内容失败,
Your session has expired. Please reauthenticate.

drive shaft carrier bearing
China Top Grade Tractor Clutch For Sale Pto Drive Shaft With Clutch (Ce Certificate)     with high quality China Top Grade Tractor Clutch For Sale Pto Drive Shaft With Clutch (Ce Certificate)     with high quality
editor by czh 2023-03-05

China Chinese Factory Tractor Rotary Mowers Tillers Pto Shaft Reducer Gearbox for Farm and Agricultural Machinery slip clutch pto shaft

Merchandise Description

Tractor Rotary Mowers Bevel Fertilizer Spreader Tillers Right Angle Pto Shaft Reducer Gearbox for Farm and Agricultural Machinery

Proven in Nov.2002,HangZhou CZPT is a specialist manufacturer and provider in supplying spare parts and add-ons for agricultural equipment. In addition to the 3000 requirements components, we also provide our consumers tailor-made articles or blog posts or assemblies that are for special software.
 
HangZhou CZPT concentrated on the improvement and manufacturing of gearboxes with a specialist staff and continue to learn sophisticated technologies the use of first-course tools higher high quality offer chain technique, relying on these, the gearboxes get high reputation among consumers at house and abroad.
 
These gearboxes are commonly utilised in rotary tillers, lawn mowers, harvesters, gap diggers, pesticide sprayers, irrigation devices, fertilizer spreaders, blenders and so on. The primary products are:
 
–Straight bevel gearbox
–Spiral bevel gearbox
–Planetary reducer
–Worm gearbox

HangZhou CZPT Intercontinental Buying and selling Co.,Ltd is a modern day organization specilizing in the advancement, production, revenue and providers of PTO shaft. We adhere to the principle of “Precise Driveline, Advocate Environmentally friendly”, employing superior technologies and equipments to guarantee all the technological requirements of precise driveline. So that the transmission performance can be maxmized and each and every fall of source of customers’ can be saved. In the meantime, we have a buyer-centric support program, supplying a full assortment of pre-sale, sale and soon after-sale provider. Client pleasure is our forever pursuit.

We stick to the principle of people first, trying our very best to established up a enjoyable surroundings and system of performance for every personnel, so every person can be self-consciously energetic to be a part of in “Precise Driveline, Adocate Eco-friendly” to embody the self-well worth, business worth and social value.

Newnuro’s goal is: lowering customer’s purchase spending budget, assistance buyers to earn a lot more market.
Newnuro often finds remedy for buyers.Client satisfaction is our ultimate purpose and forever pursuit.

 

US $60
/ Piece
|
10 Pieces

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Assembled
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $60
/ Piece
|
10 Pieces

(Min. Order)

###

Application: Machinery, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Assembled
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

Shaft CollarA Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China Chinese Factory Tractor Rotary Mowers Tillers Pto Shaft Reducer Gearbox for Farm and Agricultural Machinery     slip clutch pto shaftChina Chinese Factory Tractor Rotary Mowers Tillers Pto Shaft Reducer Gearbox for Farm and Agricultural Machinery     slip clutch pto shaft
editor by czh 2023-01-05

China Top Quality Agricultural Tractors Pto Drive Shaft with Shear Pin Clutch with CE/BV/SGS pto shaft diagram

Solution Description

Item Description

 

Business Profile

In 2571, HangZhou CZPT Equipment Co.,ltd was set up by Ms. Iris and her 2 partners(Mr. Tian and Mr. Yang) in HangZhou metropolis(ZHangZhoug province, China), all 3 Founders are engineers who have a lot more than averaged thirty many years of knowledge. Then because the needs of enterprise enlargement, in 2014, it moved to the recent Xihu (West Lake) Dis. Industrial Zone (HangZhou metropolis, ZHangZhoug province, China).

By means of our properly-acknowledged brand name ND, CZPT Machinery provides agricultural options to agriculture equipment manufacturer and distributors worldwide by way of a full line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, travel shafts, sheet steel, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators and so on. Products can be custom-made as ask for.

We, CZPT equipment recognized a complete quality administration method and revenue provider community to offer customers with higher-quality goods and satisfactory service. Our merchandise are offered in forty provinces and municipalities in China and 36 countries and locations in the world, our major industry is the European marketplace.

Our manufacturing facility

 

Certifications

Why pick us?

1) Customization: With a powerful R&D staff, and we can build goods as required. It only normally takes up to 7 days for us to layout a set of drawings. The production time for new merchandise is typically 50 times or significantly less.

two) Good quality: We have our own comprehensive inspection and testing products, which can guarantee the quality of the products.

three) Capacity: Our once-a-year manufacturing capability is above 500,000 sets, also, we also take little amount orders, to fulfill the requirements of different customer’s buy quantities.

4) Service: We concentrate on supplying large-high quality items. Our products are in line with international specifications and are primarily exported to Europe, Australia, and other nations and regions.

five) Shipment: We are near to HangZhou and ZheJiang ports, to give the fastest delivery service.

Packaging & Transport

 

FAQ

Q: Are you a investing business or manufacturer?
A: We are manufacturing facility and providing gearbox ODM & OEM solutions for the European marketplace for a lot more than ten years

Q: Do you offer samples? is it free or additional?
A: Yes, we could supply the sample for free of charge cost but do not shell out the price of freight.

Q: How long is your supply time? What is your phrases of payment?
A: Typically it is forty-45 days. The time may possibly vary based on the merchandise and the level of customization.
For standard products, the payment is: 30% T/T in advance,harmony before shipment.

Q: What is the exact MOQ or price for your merchandise?
A: As an OEM organization, we can supply and adapt our items to a broad range of wants.
As a result, MOQ and value might significantly differ with measurement, materials and more specifications For instance, high priced merchandise or regular products will normally have a reduce MOQ. Remember to contact us with all pertinent details to get the most correct quotation.

If you have another query, make sure you come to feel free to get in touch with us.

US $1-50
/ Piece
|
1 Piece

(Min. Order)

###

Type: Agricultural Pto/Drive Shaft
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Carbon Steel
Power Source: Tractor or Motor
Weight: 5lbs
After-sales Service: 5 Years

###

Customization:
US $1-50
/ Piece
|
1 Piece

(Min. Order)

###

Type: Agricultural Pto/Drive Shaft
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Carbon Steel
Power Source: Tractor or Motor
Weight: 5lbs
After-sales Service: 5 Years

###

Customization:

wholesaler
China Top Quality Agricultural Tractors Pto Drive Shaft with Shear Pin Clutch with CE/BV/SGS     pto shaft diagramChina Top Quality Agricultural Tractors Pto Drive Shaft with Shear Pin Clutch with CE/BV/SGS     pto shaft diagram
editor by czh 2022-12-02