Tag Archives: china farming tractor

China factory 16m3 Feeding Mixing Machine CZPT Animal Cattle Cow Feed Mixer for Dairy Farm Equipment Grinder Tractor Traction Pto Driven Farming Horizontal Vertical Fixed pto shaft cover parts

Product Description

Made in China, Sold to the world
Versatile, Easy, Affordable, Powerful, Reliable

 

Feed mixer product description

Feed mixer Product Description
EL and EW series feed mixing machine is designed by the nutritional needs of cattle’s different growth and development and lactation stage, combined with the local’s specific grass resource through an advanced feed processing technology to stir, cut, knead and mix grasses. Correctly usage will reduce the subclinical mastitis of cows and increase milk quality, reduce bacteria content,which can improve work efficiency and reduce labor intensity.
EL and EW series feeder mixer applies to cow,cattle,sheep and goat farm. Available on a variety of grass, straw and silage crops such as fibrous feeds chopped and mixed with fine material mix treatment. Mixing and feeding operations once completed, to reduce intermediate links reared and improve efficiency. Reduce labor cost, save feed costs and improve economic efficiency.

Main sales territory: regions Europe, the United States, Russia, Ukraine, South America, Africa, southeast Asia and Australia,New Zealand.

Feed mixer Product Selling Points
1. It can be directly silage and a variety of straw, straw and other fiber-based feed into the mixer chopped, mixed, stirring speed, each batch of feed cutting mixing time of 30 minutes, according to the different tank volume, each feed The mixer can feed 200-2000 cows per day, which can replace more than 20 workers to reduce the labor intensity and improve the feeding efficiency.
2. Every feeding can take appropriate amount and balance all kinds of elements and nutrientions, effectively avoid the unequal nutrient intake caused by the cow’s picky food, and reduce feed waste.
3. Prolong feeding time, can increase feed intake, increase lactation amount, and prevent the drop of milk fat.
4. It is beneficial to reduce the postpartum disease, the ruminant function is stable, PH change is small,can improve the digestibility, good to maintain the health of the dairy cows.
5. feeder mixer is allowed to feed raw material with poor palatability. Mixing with silage can conceal its odor and reduce the cost of feeding.
6. It can make the formula, feeding, management and library more accurate, and it is easier to mechanization than personnel management.
7. In the place where the roughage is limited, the feed mixer can reduce the amount of coarse feed in the diet and replace the non roughage fiber.

ETL series Feed mixer(Tractor PTO and motor 2 working modes)product technical parameters

Model ETL-12 ETL-16
Capacity(m³) 12 16
work efficiency(T/H) 4-10 6-12
Dimensions(mm)L*W*H 4800*2350*2800 6500*2200*2600
Hopper size(L*W)mm 4800*2050 5500*2050
Weight(kg) 3300 5000
transmission shaft 8*20 8*20
Speed(r/min) 23 23
blade material Material Tungsten carbide Material Tungsten carbide
blade number Triangular blade 8pcs, oval blade 12pcs Triangular blade 16pcs, oval blade 14pcs
Load cell 4pcs 4pcs
Tire 750-16/4pcs 750-16/4pcs
Power(HP) 70-100 80-120
motor / 220KW*2pcs
Start the way Tractor PTO Automatic, tractor and motor 2 ways to use

ETL series Feed mixer(Tractor PTO and motor 2 working modes)details picture display

EL series Feed mixer product technical parameters

Model EL-5 EL-7 EL-9
Capacity(m³) 5 7 9
work efficiency(T/H) 3 3-5 5-12
Dimensions(mm)L*W*H 3100*2030*2400 3400*2200*2400 3900*2300*2500
Hopper size(L*W)mm 2700*2000 2700*2030 3150*2300
Weight(kg) 2100 2300 2850
transmission shaft 20*8 20*8 20*8
Speed(r/min) 23 23 23
blade material Material Tungsten carbide Material Tungsten carbide Material Tungsten carbide
blade number large triangular knife 6pcs, small triangular knife 5pcs large triangular knife 7pcs, small triangular knife 11pcs large triangular knife 7pcs, small triangular knife 6pcs
Load cell 4pcs 4pcs 4pcs
Power(HP) 40-60 50-70 70-90

EL series Feed mixer details picture display

EW series Feed mixer(Tractor PTO and motor 2 working modes)product technical parameters

Model EW-5 EW-7 EW-9
Capacity(m³) 5 7 9
work efficiency(T/H) 3-5 3-5 3-5
Dimensions(mm)L*W*H 4000*1650*2100 5000*2000*2400 4600*2000*2500
Hopper length(mm) 2800 3000 3300
Weight(kg) 2000 3000 3200
Knife shaft number Large knife body 4pcs,
knife body 5pcs
Large knife body 6pcs,
knife body 5pcs
Large knife body 7pcs,
knife body 5pcs
Blade number Crescent Knife 9pcs, Oval Knife 31pcs Crescent Knife 11pcs, Oval Knife 39pcs Crescent Knife 12pcs, Oval Knife 43pcs
Length of reducer and motor(mm) 1300 1300 1300
Reducer power(KW) 15KW 22KW 22KW
Speed(r/min) 20 18 18
Hydraulic pump motor power 1.5kw-4-B35 1.5kw-4-B35 1.5kw-4-B35
Power(HP) 40-60 50-70 70-90
Start the way (Tractor PTO and motor 2 working modes)

EW series Feed mixer(Tractor PTO and motor 2 working modes)details picture display

Feed mixer packing and shipping link display

Baler, rake and envelop machine product portfolio
Full range of tractor products display

Our company produces other agricultural machinery display
Factory introduction
ZheJiang Euro Star Machinery Manufacture Co., Ltd. is a professional Machinery and equipment manufacturer integrating R&D, design, manufacturing, sales and service. The company’s products cover agricultural machinery, construction machinery, laser equipment, generator sets and so on.
As a professional machinery equipment manufacturer in China, the company has committed itself to provide all-round solution to global modern agricultural mechanization. The company has integrating high-end products and technologies resources around the world by upgrading of technologies, quality and service and bringing forth new ideas to create innovative products as so to improve reputation and market share of CZPT in the world step by step.
The company has passed the ISO9001:2015 international quality management system certification, and based on this, covering product development, part purchase, production and manufacturing, quality inspection, sales and after-market service, so as to control the product quality on the whole.
Supported by comprehensive quality assurance system and developed sales and service network, the company has made leaping increase of sales in domestic market via trustful quality and outstanding service mode. Besides, Most of the company’s products have passed the European CE certification.products are exported to Europe, America, Latin America, the Middle East, Asia-Pacific, CIS, Africa and more than 80 countries and regions.Our products have been recognized by all foreign customers, and we are happy to establish long-term cooperative relationships with new friends.
Xihu (West Lake) Dis.g at satisfying the customers, we have worked hard to provide excellent and quick service to customers both at home and abroad via advanced technologies, developed products and comprehensive network so as to maximize the customer satisfaction.
In future, the company will adhere to the principle of sound business operation, continuous innovation and opening up and cooperation to create more high-end machinery and equipment based on current ones for the society and for agriculture and contribute to global modern agriculture production.

Tractor production workshop display

Service
One-stop business chain service support system
With an international service team with rich experience and excellent skill, company is committed to build a complete service guarantee system, which is professional, fast, efficient and comprehensive. Every consumer in overseas would receive a full-process service guarantee including pre-sales, on sale and after sales through the way of markets, spare parts, training service and technical support.

1) Market Service
Service Mode : Stationary Point + Circuit Service
Long-term Stationary Point Service
Short-term Circuit Technology Support Service
Service Process: Standard, High Efficient, Seasonable
Service Image: Professional, Unified

2) Spare Parts Service
Spare Parts Guarantee Measures: Dealer+ Spare Part Warehouse
100% original spare parts assure good quality;
Bar-code system adopted in the whole process assures accuracy and promptness;
Professional and accurate package and logistics assure safe and relieved transportation.

3) Training Service
Characteristic Training Mode: invite the technicians of dealers to factory for training, send engineers to dealers for training;
A full range of training tools, multi-language training materials, vivid training video;
Professional training teachers with rich service experience and good communication capability;
One-to-1 special assignment training;
Remote online network training;

4) Technical Support
The whole process Technology support covers on sale and after-sale service.

Terms of the deal:
1). Delivery: 20 days for normal orders
2). Price: We have price on basis FOB HangZhou and CIF your destination for your choice
3). Payment terms for first order:
—–T/T 30% deposit and balance before shipment
—–100% L/C at sight
4). Payment for long terms cooperation of good reputation partners, we have SINOSURE insurance for our VIP clients, and we can offer credit service after we familiar with each other. We are looking for partnership for long-term business

FAQ:
Why choose us?
1). The quality is guaranteed due to strong technical support ,first class component ,advanced production line and strict quality control system.
2). Be leading Expert in global market for more than 5 years, China Famous Export Brand recommended by CCCME (China Chamber of Commerce for Import and Export of Machinery and Electronic Products)
3). One-stop service with a large spare parts warehouse and professional service team .No matter where you are, you are guaranteed of Eurostar’ s warm reception, trustworthy and efficient professional services and persistent care.

How Shipment?
We have worked with many world famous shipping carriers and can arrange shipment to any country in the world, it can save your time and money. We can provide airfreight and CZPT service.

Contact us
Mr. Duke Zhang
ZheJiang Euro Star Machinery Manufacture Co., Ltd.
Add: 198 HangZhou Street, Xihu (West Lake) Dis. District, HangZhou City, ZheJiang Province,P.R.C.
Web:eurostartractor

EUROSTAR CUSTOMERS ALL OVER THE WORLD

After-sales Service: 1-3 Years
Type: Mixing Equipment
Processing Object: Forage, Straw
Processing Technics: Mixing-before-Crushing
Screen Mesh: Without Screen Mesh
Grinding Equipment Type: Feed Mixer
Customization:
Available

|

Customized Request

Shaft Collar

Safety Precautions For a PTO Shaft

When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.

Safety precautions

One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.

Types of pto shafts

PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Shaft Collar

Reaction time

It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.

Standardization

The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Shaft Collar

Safety chains

The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.

Shield

The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
China factory 16m3 Feeding Mixing Machine CZPT Animal Cattle Cow Feed Mixer for Dairy Farm Equipment Grinder Tractor Traction Pto Driven Farming Horizontal Vertical Fixed   pto shaft cover partsChina factory 16m3 Feeding Mixing Machine CZPT Animal Cattle Cow Feed Mixer for Dairy Farm Equipment Grinder Tractor Traction Pto Driven Farming Horizontal Vertical Fixed   pto shaft cover parts
editor by CX 2023-04-24

China wholesaler 16m3 Feeding Mixing Machine Cattle CZPT Animal Cow Feed Mixer for Dairy Farm Equipment Grinder Tractor Traction Pto Driven Farming Horizontal Vertical Fixed pto shaft adapter tractor supply

Product Description

Made in China, Sold to the world
Versatile, Easy, Affordable, Powerful, Reliable

 

Feed mixer product description

Feed mixer Product Description
EL and EW series feed mixing machine is designed by the nutritional needs of cattle’s different growth and development and lactation stage, combined with the local’s specific grass resource through an advanced feed processing technology to stir, cut, knead and mix grasses. Correctly usage will reduce the subclinical mastitis of cows and increase milk quality, reduce bacteria content,which can improve work efficiency and reduce labor intensity.
EL and EW series feeder mixer applies to cow,cattle,sheep and goat farm. Available on a variety of grass, straw and silage crops such as fibrous feeds chopped and mixed with fine material mix treatment. Mixing and feeding operations once completed, to reduce intermediate links reared and improve efficiency. Reduce labor cost, save feed costs and improve economic efficiency.

Main sales territory: regions Europe, the United States, Russia, Ukraine, South America, Africa, southeast Asia and Australia,New Zealand.

Feed mixer Product Selling Points
1. It can be directly silage and a variety of straw, straw and other fiber-based feed into the mixer chopped, mixed, stirring speed, each batch of feed cutting mixing time of 30 minutes, according to the different tank volume, each feed The mixer can feed 200-2000 cows per day, which can replace more than 20 workers to reduce the labor intensity and improve the feeding efficiency.
2. Every feeding can take appropriate amount and balance all kinds of elements and nutrientions, effectively avoid the unequal nutrient intake caused by the cow’s picky food, and reduce feed waste.
3. Prolong feeding time, can increase feed intake, increase lactation amount, and prevent the drop of milk fat.
4. It is beneficial to reduce the postpartum disease, the ruminant function is stable, PH change is small,can improve the digestibility, good to maintain the health of the dairy cows.
5. feeder mixer is allowed to feed raw material with poor palatability. Mixing with silage can conceal its odor and reduce the cost of feeding.
6. It can make the formula, feeding, management and library more accurate, and it is easier to mechanization than personnel management.
7. In the place where the roughage is limited, the feed mixer can reduce the amount of coarse feed in the diet and replace the non roughage fiber.

ETL series Feed mixer(Tractor PTO and motor 2 working modes)product technical parameters

Model ETL-12 ETL-16
Capacity(m³) 12 16
work efficiency(T/H) 4-10 6-12
Dimensions(mm)L*W*H 4800*2350*2800 6500*2200*2600
Hopper size(L*W)mm 4800*2050 5500*2050
Weight(kg) 3300 5000
transmission shaft 8*20 8*20
Speed(r/min) 23 23
blade material Material Tungsten carbide Material Tungsten carbide
blade number Triangular blade 8pcs, oval blade 12pcs Triangular blade 16pcs, oval blade 14pcs
Load cell 4pcs 4pcs
Tire 750-16/4pcs 750-16/4pcs
Power(HP) 70-100 80-120
motor / 220KW*2pcs
Start the way Tractor PTO Automatic, tractor and motor 2 ways to use

ETL series Feed mixer(Tractor PTO and motor 2 working modes)details picture display

EL series Feed mixer product technical parameters

Model EL-5 EL-7 EL-9
Capacity(m³) 5 7 9
work efficiency(T/H) 3 3-5 5-12
Dimensions(mm)L*W*H 3100*2030*2400 3400*2200*2400 3900*2300*2500
Hopper size(L*W)mm 2700*2000 2700*2030 3150*2300
Weight(kg) 2100 2300 2850
transmission shaft 20*8 20*8 20*8
Speed(r/min) 23 23 23
blade material Material Tungsten carbide Material Tungsten carbide Material Tungsten carbide
blade number large triangular knife 6pcs, small triangular knife 5pcs large triangular knife 7pcs, small triangular knife 11pcs large triangular knife 7pcs, small triangular knife 6pcs
Load cell 4pcs 4pcs 4pcs
Power(HP) 40-60 50-70 70-90

EL series Feed mixer details picture display

EW series Feed mixer(Tractor PTO and motor 2 working modes)product technical parameters

Model EW-5 EW-7 EW-9
Capacity(m³) 5 7 9
work efficiency(T/H) 3-5 3-5 3-5
Dimensions(mm)L*W*H 4000*1650*2100 5000*2000*2400 4600*2000*2500
Hopper length(mm) 2800 3000 3300
Weight(kg) 2000 3000 3200
Knife shaft number Large knife body 4pcs,
knife body 5pcs
Large knife body 6pcs,
knife body 5pcs
Large knife body 7pcs,
knife body 5pcs
Blade number Crescent Knife 9pcs, Oval Knife 31pcs Crescent Knife 11pcs, Oval Knife 39pcs Crescent Knife 12pcs, Oval Knife 43pcs
Length of reducer and motor(mm) 1300 1300 1300
Reducer power(KW) 15KW 22KW 22KW
Speed(r/min) 20 18 18
Hydraulic pump motor power 1.5kw-4-B35 1.5kw-4-B35 1.5kw-4-B35
Power(HP) 40-60 50-70 70-90
Start the way (Tractor PTO and motor 2 working modes)

EW series Feed mixer(Tractor PTO and motor 2 working modes)details picture display

Feed mixer packing and shipping link display

Baler, rake and envelop machine product portfolio
Full range of tractor products display

Our company produces other agricultural machinery display
Factory introduction
ZheJiang Euro Star Machinery Manufacture Co., Ltd. is a professional Machinery and equipment manufacturer integrating R&D, design, manufacturing, sales and service. The company’s products cover agricultural machinery, construction machinery, laser equipment, generator sets and so on.
As a professional machinery equipment manufacturer in China, the company has committed itself to provide all-round solution to global modern agricultural mechanization. The company has integrating high-end products and technologies resources around the world by upgrading of technologies, quality and service and bringing forth new ideas to create innovative products as so to improve reputation and market share of CZPT in the world step by step.
The company has passed the ISO9001:2015 international quality management system certification, and based on this, covering product development, part purchase, production and manufacturing, quality inspection, sales and after-market service, so as to control the product quality on the whole.
Supported by comprehensive quality assurance system and developed sales and service network, the company has made leaping increase of sales in domestic market via trustful quality and outstanding service mode. Besides, Most of the company’s products have passed the European CE certification.products are exported to Europe, America, Latin America, the Middle East, Asia-Pacific, CIS, Africa and more than 80 countries and regions.Our products have been recognized by all foreign customers, and we are happy to establish long-term cooperative relationships with new friends.
Xihu (West Lake) Dis.g at satisfying the customers, we have worked hard to provide excellent and quick service to customers both at home and abroad via advanced technologies, developed products and comprehensive network so as to maximize the customer satisfaction.
In future, the company will adhere to the principle of sound business operation, continuous innovation and opening up and cooperation to create more high-end machinery and equipment based on current ones for the society and for agriculture and contribute to global modern agriculture production.

Tractor production workshop display

Service
One-stop business chain service support system
With an international service team with rich experience and excellent skill, company is committed to build a complete service guarantee system, which is professional, fast, efficient and comprehensive. Every consumer in overseas would receive a full-process service guarantee including pre-sales, on sale and after sales through the way of markets, spare parts, training service and technical support.

1) Market Service
Service Mode : Stationary Point + Circuit Service
Long-term Stationary Point Service
Short-term Circuit Technology Support Service
Service Process: Standard, High Efficient, Seasonable
Service Image: Professional, Unified

2) Spare Parts Service
Spare Parts Guarantee Measures: Dealer+ Spare Part Warehouse
100% original spare parts assure good quality;
Bar-code system adopted in the whole process assures accuracy and promptness;
Professional and accurate package and logistics assure safe and relieved transportation.

3) Training Service
Characteristic Training Mode: invite the technicians of dealers to factory for training, send engineers to dealers for training;
A full range of training tools, multi-language training materials, vivid training video;
Professional training teachers with rich service experience and good communication capability;
One-to-1 special assignment training;
Remote online network training;

4) Technical Support
The whole process Technology support covers on sale and after-sale service.

Terms of the deal:
1). Delivery: 20 days for normal orders
2). Price: We have price on basis FOB HangZhou and CIF your destination for your choice
3). Payment terms for first order:
—–T/T 30% deposit and balance before shipment
—–100% L/C at sight
4). Payment for long terms cooperation of good reputation partners, we have SINOSURE insurance for our VIP clients, and we can offer credit service after we familiar with each other. We are looking for partnership for long-term business

FAQ:
Why choose us?
1). The quality is guaranteed due to strong technical support ,first class component ,advanced production line and strict quality control system.
2). Be leading Expert in global market for more than 5 years, China Famous Export Brand recommended by CCCME (China Chamber of Commerce for Import and Export of Machinery and Electronic Products)
3). One-stop service with a large spare parts warehouse and professional service team .No matter where you are, you are guaranteed of Eurostar’ s warm reception, trustworthy and efficient professional services and persistent care.

How Shipment?
We have worked with many world famous shipping carriers and can arrange shipment to any country in the world, it can save your time and money. We can provide airfreight and CZPT service.

Contact us
Mr. Duke Zhang
ZheJiang Euro Star Machinery Manufacture Co., Ltd.
Add: 198 HangZhou Street, Xihu (West Lake) Dis. District, HangZhou City, ZheJiang Province,P.R.C.
Web:eurostartractor

EUROSTAR CUSTOMERS ALL OVER THE WORLD

After-sales Service: 1-3 Years
Type: Mixing Equipment
Processing Object: Forage, Straw
Processing Technics: Mixing-before-Crushing
Screen Mesh: Without Screen Mesh
Grinding Equipment Type: Feed Mixer
Customization:
Available

|

Customized Request

Shaft Collar

PTO Shafts and PTO Shaft Shields

When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.

540 rpm

A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.

Safety chains

Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.

Shield

Shaft CollarThe PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.

Reverse rotation

Shaft CollarThe PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
China wholesaler 16m3 Feeding Mixing Machine Cattle CZPT Animal Cow Feed Mixer for Dairy Farm Equipment Grinder Tractor Traction Pto Driven Farming Horizontal Vertical Fixed   pto shaft adapter tractor supplyChina wholesaler 16m3 Feeding Mixing Machine Cattle CZPT Animal Cow Feed Mixer for Dairy Farm Equipment Grinder Tractor Traction Pto Driven Farming Horizontal Vertical Fixed   pto shaft adapter tractor supply
editor by CX 2023-04-23